23
System Event
Notification
Health Check
(Allows the user to set e-Mail Status periodically) : Daily or Weekly or Monthly
Video Clip Setup: Setup the duration of video clip for Pre Record and Post Record.
Event And Notification – Yes or No
(Allows the user to set Event Notification On or Off)
Health Check / Restart / Shutdown / Panic Record
- Enable Email Notification in the event a problem occurs with the VN.
Alarm-In – Enable Email Notification when the camera detects sensor.
Motion Detection – Enable Email Notification when the camera detects motion.
Video Loss – Enable Email, Beep and Alarm output Notification when the camera
signal is lost.
HDD Temperature Over – Enable Email, Beep and Alarm output Notification when
the HDD temperature.
HDD Bad Sectors Over – Enable Email Notification when the HDD has bad
Sectors.
HDD Almost Full Over – Enable Email Notification when the HDD is almost full
HDD Full – Enable Email Notification when the HDD is full
HDD Failure – Enable Email, Beep and Alarm output Notification when the
HDD fails.
To Next Page
Loading...
