23
4-3. Setup ā RECORD Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Figure 4.3.1. RECORD Setup Screen
Table 4.3.1. Menu Items in RECORD Setup Screen
Select a channel for applying the following settings using the mouse or the control
button on the remote control. To change the values of all channels, take the
following steps. Select the following to change the values of all channels.
To Next Page
Loading...
