Speco D8RS - Network; User Management

72
 MAIN MONITOR SEQUENCE: Setting for automatically switching the displayed video.
 SEQUENCE DWELL TIME: Sets the interval for automatically switching the screens.
 SITE: Name, Covert, Brightness, Contrast, Hue, Saturation
These settings apply to the specified channel only.
7-7-5. Network
 NETWORK TYPE
o STATIC: The address setting mode is manual. Input IP, Gateway, Subnet Mask, and DNS IP.
o DHCP: The address setting mode is automatic.
 DDNS: Set whether to use DDNS service or not.
o HOST NAME: Allows the user to setup a domain name manually
o SUMBIT/UPDATE: Select ON to submit the settings
o ezDDNS: Enable/disable ezDDNS to register the host name automatically
 NETWORK PORT: When connecting multiple DVRs to the network, set a unique port number.
 NETWORK AUDIO PORT: Display the network audio port (NETWORK PORT + 1).
 WEB PORT: Set a web server port number.
 NETWORK STREAM: Set the Resolution, Frame Rate, and the Quality.
7-7-6. User Management
Select the USER MANAGEMENT tab to change the USER MANAGEMENT password.
 USER
o CHANGE: If logged in as ADMIN, user can change password for ADMIN and USER1/2/3.
o NEW PASSWORD: Enter new password.
o CONFIRM PASSWORD: Re-enter new password to confirm.