Speco DVR-4TN - Weekend Start; End; Preset Record Configuration

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
31
Weekend Start/ End
The Weekend Start Time indicates the specific day and time that a weekend
begins, for example, FRI 18:00. The Weekend End Time indicates the specific
time and day that a weekend ends, for example, MON 06:00. Time is
indicated in 1-minute increments.
Note that the value you have set indicates when the regular Day and Night
scheduling ends, and when the Weekend recording begins.
3.6.3 Preset Record Configuration
The <Preset Config> is used to preset recording quality and frame rate for
normal record and event record. In normal circumstances, we strongly
suggest you set the item to <Standard>, the default. Below tables show the
PPS and picture size under <Standard> in Half-D1 mode. Please refer to
section 5.4.3 Preset Record Configuration for more detailed information.
DVR-4TN/ 8TN/ 16TN
Half-D1 mode (NTSC: 720x240@60PPS / JPEG; PAL: 720x288@50PPS / JPEG)
Normal PPS Normal Quality Event PPS Event Quality
4CH
NTSC:15
PAL:12.5
8CH
NTSC:7.5
PAL:6.25
12 / 18 KB 20 / 28 KB
16CH
NTSC:3.75
PAL:3.12
15 / 21 KB
NTSC:30
PAL:25
25 / 33 KB
DVR-16TS
Half-D1 mode (NTSC: 720x240@120PPS / JPEG; PAL: 720x288@100PPS / JPEG)
Normal PPS Normal Quality Event PPS Event Quality
16CH
NTSC:7.5
PAL:6.25
12 / 18 KB
NTSC:30
PAL:25
20 / 28 KB
DVR-16TT
Half-D1 mode (NTSC: 720x240@240PPS / JPEG; PAL: 720x288@200PPS / JPEG)
Normal PPS Normal Quality Event PPS Event Quality
16CH
NTSC:15
PAL:12.5
6 / 9 KB
NTSC:30
PAL:25
10 / 15 KB