Speco DVR-4TN - Audio Output; Key Beep; Parity; Stop

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
79
5.1.7.4 Stop
The user can specify the stop bit associated with this protocol. Options are
<1> and <2> stop bits. The default is <1> stop bit.
5.1.7.5 Parity
This item is used to specify the parity associated with this protocol. Options
are <ODD>, <EVEN>, and <NONE>. The default is <NONE>.
5.1.8 Audio Output
The item is used to set the audio output mode. The available options are as
listed as follows.
<Live/Playback>
Select this item to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
<Always Live>
Select this item to play live sounds in both live mode and playback mode.
<OFF>
Select this item to disable the audio output function.
5.1.9 Key Beep
This item is used to enable or disable the key tone. Select <YES> to enable
the key tone, or <NO> to disable.