Speco DVR-4TN - Sequence Setup

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
93
5.5 Sequence Setup
The Sequence Setup menu allows the user to set the camera sequence
schedule and dwell time for main and call monitor. Select <Sequence Setup>
in Main menu and press ENTER; the menu displays as follows.
Sequence Setup
1. Main Monitor Dwell
2. Main Monitor Schedule
3. Call Monitor Dwell
4. Call Monitor Schedule
5 Sec
5 Sec
Items in the Sequence Setup menu are described in the following
subsections.
5.5.1 Main / Call Monitor Dwell
The Main / Call Monitor can be set to display full screen video for all installed
cameras in sequence. This item is used to set the Main / Call Monitor dwell
time, which is the amount of time elapsed between switching images. The
dwell time has an available range of 1 to 120 seconds. The default value is 5
seconds.
5.5.2 Main / Call Monitor Schedule
This item is used to set the Main / Call Monitor camera sequence in full screen
format. Move the cursor to <Main Monitor Schedule> and press ENTER; the
menu is displayed as follows.
Main Monitor Schedule
_►_►_►_►_►_►_►_►_
►_►_►_►_►_►_►_
Press 1-16 Key To Select Channel
Press ◄ To D el e te
Follow these steps to set a sequence:
• Press LEFT direction key to delete the original setting.
• Press the desired Channel keys to assign a camera to that location in the
sequence.
• Continue the steps until the sequence is completed.