• Logs
This network camera support system log information. Click the System Log button to get the log
data.
• Reports
- Server Report: Click the Server Report button to get the important information about the
server’s status and should always be included when requesting support.
- Parameter List: Click the Parameter List button to see the unit’s parameters and their
current settings.
• Health Check
- System Check: Click the System Check button to get the important information about the
camera’s system resources.
- Media Check: Click the Media Check button to get the information about the camera’s video and
audio stream.
- Networks Check: Click the Network Check button to get the information about the camera’s
network setting and traffic. You can see the pop-up window below.
- Hardware Check: Click the Hardware Check button to diagnose the camera’s hardware like video.
63
To Next Page
Loading...