Spectra Precision Focus 8 Series User Manual

Spectra Precision Focus 8 Series Total Station User Guide 25
Preparation 2
Setting up the tripod
CAUTION – The tops of the tripod ferrules are very sharp. When handling or carrying the
tripod, take care to avoid injuring yourself on the ferrules.
1. Open the tripod legs enough to for the instrument to be stable.
2. Locate the tripod directly over the station point. To check the tripod’s position,
look through the center hole in the tripod head.
3. Firmly press the tripod ferrules into the ground.
4. Level the top surface of the tripod head.
5. Securely fasten the thumb screws on the tripod legs.
6. Place the instrument on the tripod head.
7. Insert the tripod mounting screw into the center hole of the base plate of the
instrument.
8. Tighten the tripod mounting screw.
Note – Do not carry the instrument while it is attached to a tripod.

Spectra Precision Focus 8 Series Specifications

General

Brand	Spectra Precision
Model	Focus 8 Series
Category	Measuring Instruments
Language	English