EasyManuals Logo

Spectra Precision Focus 8 Series User Manual

Spectra Precision Focus 8 Series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
 
            
WARNING – Charge and use the rechargeable Lithium-ion battery only in strict
accordance with the instructions. Charging or using the battery in unauthorized
equipment can cause an explosion or fire, and can result in personal injury and/or
equipment damage.
To prevent injury or damage:
–Do not charge or use the battery if it appears to be damaged or leaking.
–Charge the Lithium-ion battery only in a product that is specified to charge it. Be sure to
follow all instructions that are provided with the battery charger.
–Discontinue charging a battery that gives off extreme heat or a burning odor.
–Use the battery only in equipment that is specified to use it.
–Use the battery only for its intended use and according to the instructions in the product
documentation.
Laser safety
Focus 8 2" is a Class 3R Laser Product in accordance with: IEC60825-1, Am2 (2001):
“Safety of Laser Products
Use of the Laser Class 3R equipment can be dangerous.
Focus 8 5" is a Class 2 Laser Product in accordance with: IEC60825-1, Am2 (2001):
“Safety of Laser Products
Precautions: To counteract hazards, it is essential for all users to pay careful attention
to the safety precautions and control measures specified in the standard IEC60825-1
(2001-08) resp. EN60825-1:1994 + A11:1996 + A2:2001, within the hazard distance
1
);
particularly as described in this User’s Guide.
WARNING – Only qualified and trained persons should be assigned to install, adjust and
operate the laser equipment.
WARNING – Areas in which these lasers are used should be posted with an appropriate
laser warning sign.
WARNING – Precautions should be taken to ensure that persons do not look directly, with
or without an optical instrument, into the beam.
WARNING – The laser beam should be terminated at the end of its useful beam path and
should in all cases be terminated if the hazardous beam path extends beyond the limit
(

1
) of the area in which the presence and activities of personnel are
monitored for reasons of protection from laser radiation.
1.
The hazard distance is the distance from the laser at which beam irradiance or radiant exposure
equals the maximum permissible value to which personnel may be exposed without being exposed
to health risk.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spectra Precision Focus 8 Series and is the answer not in the manual?

Spectra Precision Focus 8 Series Specifications

General IconGeneral
BrandSpectra Precision
ModelFocus 8 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals