Spectra Precison GL1425C

Questions and Answers

K
Kimberly FergusonAug 15, 2025
How to fix error 030 on Spectra Precision Measuring Instruments?
- L
  Lauren BestAug 15, 2025
  To address error 030 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. Note that this resets the laser to its default settings, so you may need to reconfigure your personal settings. Also, verify the pairing between the laser and the remote control, HL760/CR700 receiver, or smartphone, and re-establish the connection if necessary.
C
Christian KellyAug 18, 2025
What to do if error 150 appears on Spectra Precision Measuring Instruments?
- K
  Katrina JacksonAug 18, 2025
  To resolve error 150 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. Ensure the HL760/CR700 receiver is switched on and properly paired with the laser. The HL760/CR700 may have turned off automatically. Also, verify that the receiver is within the radio range.
M
Melissa VanceAug 21, 2025
What to do if Spectra Precision Measuring Instruments show error 140?
- J
  Jeremy BriggsAug 21, 2025
  To clear error 140 on your Spectra Precision Measuring Instruments, press the E button on the laser or remote control, or the OK button in the app. Ensure there are no obstructions between the laser and the HL760/CR700 receiver during operation, as the receiver must maintain continuous laser beam contact for proper function.
S
sherrynewmanAug 25, 2025
How to troubleshoot error 152 on Spectra Precision Measuring Instruments?
- D
  Daniel HerreraAug 26, 2025
  To address error 152 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. Check the operating range for the auto function and restart the function. Ensure the receiver is not too far away, too high, or too low. Also, verify the receiver is placed along the correct axis; if not, reposition it accordingly.
X
xdavisAug 28, 2025
How to troubleshoot error 153 on Spectra Precision Measuring Instruments?
- C
  carol08Aug 28, 2025
  To address error 153 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. Check the operating range for the auto function and restart the function. Ensure the receiver is not too far away, too high, or too low. Also, verify the receiver is placed along the correct axis; if not, reposition it accordingly.
B
Bethany HarrisAug 31, 2025
What to do if Spectra Precision Measuring Instruments show error 035?
- J
  jessica88Aug 31, 2025
  To resolve error 035 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. It is recommended to check the laser accuracy.
C
Chad SweeneySep 4, 2025
How to fix error 120 on Spectra Precision Measuring Instruments?
- S
  Stephanie TranSep 4, 2025
  To clear error 120 on your Spectra Precision Measuring Instruments, press the E button on the laser or remote control, or the OK button in the app. Check the Laser Beam Elevation and Laser Setup.
E
esimmonsSep 7, 2025
How to fix error 130 on Spectra Precision Measuring Instruments?
- T
  Timothy TaylorSep 7, 2025
  To clear error 130 on your Spectra Precision Measuring Instruments, press the E button on the laser or remote control, or the OK button in the app. Check the Laser Beam Elevation and Laser Setup.
R
Robert MillerSep 12, 2025
What to do if Spectra Precision Measuring Instruments display error 157?
- M
  masoncharlesSep 12, 2025
  To address error 157 on your Spectra Precision Measuring Instruments, first, acknowledge the error by pressing the E button on the laser or remote control, or the OK button in the app. Check the operating range for the auto function and restart the function. Ensure the receiver has not been placed too far away.