13
>>Temp Check<<
>>Settings<<
>>Info<<
>>Service<<
Menu functions when GL1425C set up in vertical mode:
>>Rotation<<
>>PlaneLok<<
>>Linecsan<<
>>Mask Mode<<
>>Settings<<
>>Info<<
>>Service<<
7 Bluetooth® Connectivity
WHY: Bluetooth® is an easy way to connect your laser with another device that also
provides Bluetooth®. The GL1425C provides Bluetooth® connectivity to connect your
smartphone with the laser when using the Spectra Precision Laser Remote App.
WHAT: The Spectra Precision Laser Remote App is available on Google Play Store and
App store. Download the app from the store to your smartphone and install it.
HOW: Option 1: When powering on the GL1425C, it is in connectivity mode for the
rst thirty seconds. During this time, start the Laser Remote App. When starting the
Laser Remote App for the very rst time after installation, accept the EULA. If the
EULA is not accepted, the App cannot be used. Also enable the GPS function on the
smartphone. When the Bluetooth® connection was successful, the laser status LED
(d) will be blue and the Laser Remote App shows the standard display of the GL1425C.
Option 2: Press M button (h) on the laser (not the remote control) to enter
the menu. Scroll to >>Settings<< and press E button (j) to enter the sub menu. Scroll
to >>Pairing<< and press E button (j) to enter the sub menu. Scroll to Bluetooth and
press E button (j) to start the connectivity mode for the Bluetooth. The laser is in Blue-
tooth connectivity mode for 30 seconds. Now start the Laser Remote App. When the
Bluetooth® connection was successful, the Laser status LED (d) will turn blue and the
Laser Remote App shows the standard display of the GL1425C.
Note: In manual mode, the laser status LED (d) will continue with a short blinking in
blue color every two seconds indicating the Bluetooth® connectivity.
>>Settings<< → >>Pairing<< → >>Bluetooth<<
8 Horizontal automatic, self-leveling mode
WHY: The laser GL1425C provides a horizontal laser reference for measurements on
a jobsite. This laser reference is used to establish and check horizontal heights for
elevation control on jobsites
WHAT: By rotating the laser head, the laser provides a horizontal laser plane, which is
detected with a laser receiver. Under very low ambient light conditions, the laser beam
To Next Page
Loading...
