37
31 Declaration of Conformity
We
Spectra Precision LLC
declare under our sole responsibility that the products
GL1425C and optional RC1402
to which this declaration relates is in conformity with the following standards:
EN300 440-2 V1.1.1:2004, EN301 489-03 V1.4.1:2002, EN301 489-01 V1.4.1:2002,
EN50371:2002 following the provision of directive R&TTE 1999/5/EC.
32 UKCA
We declare under our sole responsibility that the GL1425C and RC1402 comply with
all applicable provisions of the regulations listed below and are in conformity with the
following standards.
EN 60825-1:2014
EN IEC 62368-1:2020 + A11:2020
EN61000-6-3:2007 + A1:2011
EN IEC 61000-6-2:2019
33 Electro-Magnetic Compatibility
Compliance statement (part 15.19): This device complies with part 15 of the FCC
Rules. Operations is subject to the following tow conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning (part 15.21): Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This in particular is applicable for the antenna, which has been delivered with the
GL1425C and RC1402. Under Industry Canada regulations, this radio transmitter
may only operate using an antenna of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
To Next Page
Loading...