Spectra Precison GL1425C - RC1402 Remote Control; Batteries; Installing Batteries

9
k Rotorhead
l Sunshade
m Sighting Guides
n Slope Indication Marks
o Laser Keypad
p Recharge Port
q Recharge Cover
r Handle
s Battery Door
t Battery Door Latch
u Tripod Mounts 5/8x11
v Stands Support for vertical setup
w Serial Number/Laser Safety
Label
x Rechargeable Battery Pack B10
y Universal Charger CH10
3.3 RC1402 Remote Control
The remote control oers the same functions as the GL1425C keypad.
a Power Button Press for one second to turn on; press and hold
for two seconds to turn o
b Battery LED Shows the amount of battery charge
c Manual Button Quickly press and release activates/deactivates
the manual mode/single axis slope mode
f Up and Down Arrow Buttons
g Left and Right Arrow Buttons
h M – Menu Button Quickly press and release enters the Menu and
can be used to return to previous menu position
j E – Enter Button Quickly press and release starts the selected
mode
3.4 Batteries
3.4.1 Installing batteries
Open the battery door. Insert the rechargeable battery
pack or alkaline batteries into the housing. If using
alkaline, install per the “+” and “–“ symbols noted in the
battery compartment.
Note: DO NOT REMOVE RECHARGEABLE BATTERIES
FROM THEIR CAGE AND INSTALL ALKALINE
BATTERIES. SEVER DAMAGE TO THE UNIT WILL
RESULT IF CHARGING IS ATTEMPTED.