Spectra Precison GL1425C - Pairing the RC1402 Remote Control with the Laser; RC1402 Menu Navigation

31
HOW: First, make sure the laser and the remote control are turned o. Start with the
laser by pressing and holding the Manual button when turning on the laser. Now the
laser is in paring mode for the next six seconds. Within this time frame continue with
the remote control. Press and hold the manual button on the remote control and turn
on the remote control.
The laser beeps and the remote’s display shows “Pairing OK” for one second and then
the display shows the current working mode.
22.4 RC1402 Menu Navigation
Press and release ‘M’ button to enter the Menu.
The actual available function will be marked in arrow brackets >> <<. A down or up
arrow on the right side indicates that the user can scroll up or down through the
menu using the Up or Down arrow buttons. Press and release button ‘E’ to open the
submenu or start the selected function.
Press and release the ‘M’ button to go back to the previous or standard display.
Press and release the Up or Down buttons until the desired function at the selected
menu row is selected.
Menu functions for the GL1425C:
>>Rotation<<
>>Mask Mode<<
>>Settings<<
>>Info<<
>>Service<<
23 Troubleshooting
Any error message at the laser, the RC1402 remote control, or the app can be
conrmed with a short press on the ‘E’ button or on the OK button on the app. The
table below shows the related description and possible solutions. The laser or remote
control show a string of numbers where only the last two or three digits are needed for
the error code list down below. Using the laser remote app, the text shown below will
be provided directly through the app depending on the error code.
Pic 32 example error code HI-alert
The service center should be contacted if a dierent error message as shown on the
table is displayed.