Spectra 1759EX - 9 - Programming Guide
PROGRAMMABLE OUTPUTS
Each PGM Deactivation event can be used as another start (activation) event if their respective PGM timer (see sections
[066] to [068]) is programmed with a value other than 000.
Example: section [120] = 05 03 02: this means PGM1 will activate whenever partition 2 is Stay Armed.
Section #
Event Group # Sub-Group # Partition #
[120]
PGM 1 PGM Activation Event ___/___ __ _/___ ___/___
[121]
PGM 1 PGM Deactivati on Event ___/___ __ _/___ ___/___
[122]
PGM 2 PGM Activation Event ___/___ ___/___ ___/___
[123]
PGM 2 PGM Deactivati on Eve nt __ _/___ __ _/___ ___/___
[124]
Global PGM Activation Event ___/___ ___/___ ___/___
[125]
Global PGM Deactivation Event
Used to activate PGMs on
expansion modules & LCD keypads.
___/___ __ _/___ ___/___
Event Group # Sub-Group #
00 = Zon e OK 01 to 15 = Zones 1 to 15
99 = Any Zone
01 = Zon e Open 01 to 15 = Zones 1 to 15
99 = Any Zone
02 = Partition Status 00 = System not ready (Partition 1 only)
01 = System ready (Partition 1 only)
02 = Steady Alar m in Partition
03 = Pulsed Alarm in Partition
04 = Pulsed or Steady Alarm in Partition
05 = Alarm in Partition Restored
06 = Bell Squawk Activated (Partition 1 only)
07 = Bell Squawk Deactivated (Partition 1 only)
08 = Gr ou nd start (Partition 1 only)
09 = Disarm Partition
10 = Ar m Partitio n
11 = Entry Delay (breach when system is armed)
99 = An y Sub- Group
05 = Non-Reportable Events 00 = Telephone Line Trouble (Partition 1 only)
01 = [PG] or [FNC1] key was pressed (Partition 1 only)
0 2 = In st ant A rm ing
03 = Stay Arming
04 = Force Arming
05 = Fast Exit (Force & Regular Only)
06 = PC Fail to Communicate (Partition 1 only)
07 = Midnight (Partition 1 onl y)
99 = Any Sub-Group (Partition 1 only, except 02 to 05)
06 = Arm/Disarm with Remote Control 01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
07 = Button Pressed on Remote
(see button opti on “B” on page 25 )
01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
08 = Button Pressed on Remote
(see button option “C” on page 25)
01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
09 = Button Pressed on Remote
(see button option “D” on page 25)
01 to 08 = Remote Controls 1 to 8
99 = Any Remote Control
To Next Page
Loading...
