Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
5.3.4.2 Wired Connections
Here, the Ethernet interfaces of the Spectra PowerBox 100-IoT can be configured. The colour
indicator next to each interface designation shows whether an active network cable is applied
to the interface or not.
In the as delivered state, both ETH interfaces are configured so that the IPv4 address is
automatically obtained via DHCP. All IPv4 parameters (IP address, subnet mask, standard
gateway and DNS server) are automatically obtained from the DHCP server in the local
network.
72
To Next Page
Loading...