Spectra GmbH & Co. KG
vertrieb@spectra.de
User Manual
Spectra PowerBox 100-IoT
Version 1.1
November 2017
5.3.4.2.1 Optionally disabling the network protocol for each interface
If you want to disable the network connectivity of one of the two network adapters without
disabling the complete network subsystem (see “Offline Mode”), you must remove the
checkmark from the “Enable IPV4” box.
Changes to this option have immediate impacts. To prevent yourself from being
locked out, you should not change this option if you access the Web interface
from a remote computer.
5.3.4.2.2 IP Configuration
5.3.4.2.2.1 Configuration using DHCP
If there is a DHCP server in the network, the network configuration (IP address, subnet mask,
standard gateway as well as DNS server) can be obtained from there. To this end, the Type
field must be set to “DHCP”.
The currently obtained IP address is indicated in the corresponding fields. To reload the
screen, you must possibly access the “Network Configuration” menu item again and click on
the “Wired Connections” tab.
73
To Next Page
Loading...