Spectra T200 - Page 14

Replacing the Fan Assembly Replacing a T950 or T-Finity Fan Assembly
November 2013 Spectra T200, T380, T680, T950 and T-Finity libraries
14
Replacing a T950 or T-Finity Fan Assembly
ThissectiondescribeshowtoreplaceafanassemblyinaSpectraT950or
T‐Finitylibrary.Thestepsarethesameforbothlibrarytypesandsimilar
forbothtypesoffanassembliesinaT‐Finitylibrary.
Followthesestepstoreplacethefanassembly:
1. Removethefiltercover.
T950library:Removethefiltercoverbypullingoutwardonthehandle
atthetopleftofthepanelandthebottomrightcornerofthepanel.
T‐Finitylibrary:Removethefiltercoverbypullingoutwardonthe
bottomcenterofthepanel,thenpullingoutwardonthehandleatthe
topcenterofthepanel.
2. Setthecoveraside.
Filter
cover
Library Front View