Spectra T200 - Page 9

Replacing the Fan Assembly Replacing a T200, T380, or T680 Fan Assembly
November 2013 Spectra T200, T380, T680, T950 and T-Finity libraries
9
3. Usingyourfingersora#2Phillipsscrewdriver,loosenthetwoknurled
screwssecuringthebottomofthelibraryfrontpaneltothechassis.
4. Liftthefrontpanelupwardandawayfromthechassistodisengagethe
twonutsonthebackofthefrontpanelfromtheholesoneithersideof
thechassis.Setthecoveraside.
Figure 3 Front panel screws.
Figure 4 Front panel removal.
Knurled
screws
Library Front
Alignment nut
on front panel
Library Front
Lift up and away