1.1 Safety Symbols
The following symbols are used in Spectracom technical documentation.
Symbol Signal word Definition
DANGER!
Potentially dangerous situation which may lead to personal
injury or death!
Follow the instructions closely.
CAUTION!
Potential equipment damage or destruction! Follow the instruc
tions closely.
NOTE
Tips and other useful or important information.
ESD
Risk of ElectroStatic Discharge! Avoid potential equipment
damage by following ESD Best Practices.
CHASSIS GROUND
Never remove or loosen cables or screws serving as chassis
ground to prevent potentially dangerous situations.
Analog Ground
Do not tamper with Analog Ground, as this can lead to
impaired functionality of the equipment.
Recycle
Recycle the mentioned components at their end of life. Follow
local laws.
Table 1-1:
Spectracom safety symbols
1.2 About Safety
This product has been designed and built in accordance with state-of-the-art standards and the
recognized safety rules. Nevertheless, its use may constitute a risk to the operator or install
ation/maintenance personnel, if used under conditions that must be deemed unsafe, or for pur
poses other than the product's designated use, which is described in the introductory technical
chapters of this guide.
1.2.1 Basic Responsibilities
The equipment must only be used in technically perfect condition. Check components for
damage prior to installation. Also check for loose or scorched cables on other nearby
2
CHAPTER 1 • Instruction Manual XYZ Rev. R
1.1 Safety Symbols
To Next Page
Loading...