Revision ECN Description Date
C 2341 Changes to bring manual current to soft
ware rev. 1.4.0: Changed GPI/O Output
Squarewave Output specification. Revised
basic breakout cable pinout.
D 2498 Updated for PTP, additional maintenance. Sept. 2010
E 2570 Minor corrections/maintenance to coincide
with TSync driver version 2.41
January 2011
F 2702 Updated address information October 2011
G 3412 - Update for new GNSS receiver
- Updated specification to match data sheet
- Updated information on breakout cable
February 2014
H 3430,
3449
- Correction, page 6-3: Designation, pin 6
- Specification correction, 10-MHz Output,
phase noise
May 2, 2014
J Content delivery changes May 20, 2014
To Next Page
Loading...