14169000-IG, Edition 11.0
January 2018, Original document
34
Configurations and Administrations
A few configuration settings on the Spectralink server's web based Administration Page are used to
control base station synchronization via LAN.
IP-DECT/DECT Server System Settings
The system wide settings for synchronization via LAN are located under Configuration > Wireless
Server > Base stations:
Field Setting
Default sync type This setting controls the default synchronization type for
new base stations. The following values can be selected:
l Free running
l Radio (default)
l LAN
LAN sync transport protocol This setting controls the protocol used as transport for
the PTPv2 packets used for synchronization. The fol-
lowing values can be selected:
l Ethernet
l IPv4 (default)
l IPv6
IPv4 is the default and recommended in most networks.
Base Station Individual Settings
Field Setting
Type This setting controls the synchronization type for specific
base station. The following values can be selected:
l Free running
l Radio
l LAN
l Gateway
Spectralink IP-DECT Server 400/6500 and DECT Server 2500/8000 Synchronization and Deployment Guide
To Next Page
Loading...
