14169000-IG, Edition 11.0
January 2018, Original document
5
Introduction
This guide is intended for qualified technicians who will deploy Spectralink IP-DECT/DECT Server
Solutions. To qualify to deploy a IP-DECT/DECT Server Solution, you must have understood and
completed the technical training successfully. This guide covers both 1G8 and 1G9 deployment.
Scope
The Synchronization and Deployment Guide provides instructions and best practices for deployment
of the following solutions:
l Spectralink IP-DECT/DECT Server 8000 and 2500
l Spectralink IP-DECT/DECT Server 6500 and 400
The purpose of this guide is to familiarize you with the procedures that are needed to carry out a site
survey as well as understand the requirements to ensure synchronization is successfully imple-
mented. At the completion of this guide you should be comfortable with the following:
l Using a handset to measure and record Q - and RSSI values (RF values).
l Selecting a proper mounting location for base stations and repeaters.
l Making sure that the company LAN meets the LAN Synchronization requirement limits, and
documenting the deployment.
Before You Begin
This guide assumes the following:
l You have a working knowledge of deployment in general
l You have completed the technical training
Spectralink IP-DECT Server 400/6500 and DECT Server 2500/8000 Synchronization and Deployment Guide
To Next Page
Loading...
