Spectrum RAC2V1K User Manual

5. If you select PPTP:
21
• Username:
• Password:
• Get the WAN IP Automatically:
• IP:
• Subnet Mask:
• Gateway:
• Click Apply.
This field is only available when you set the WAN
Connection Type as PPPoE, PPTP or L2TP.
This field is only available when you set WAN Connection
Type as PPPoE, PPTP or L2TP.
Select Yes to get WAN IP automatically and No to enter IP
manually below.
If WAN connection requires a static IP address, key in the
IP address in this field.
If WAN connection requires a static IP address, key in the
subnet mask in this field.
If WAN connection requires a static IP address, key in the
gateway IP address in this field.

Spectrum RAC2V1K Specifications

General

Brand	Spectrum
Model	RAC2V1K
Category	Network Router
Language	English