Spectrum RAC2V1K User Manual

48
2.4.1.2 LAN Settings
2.4.1.2.1 LAN
The LAN IP module lets administrator modify LAN-side IP address of the router.
Steps to modify the LAN IP settings:
1. From the navigation panel, go to Advanced > Network > LAN > LAN IP.
2. IP Address:
3. Subnet Mask:
4. Click Apply.
NOTE: Any change to the LAN IP module will affect router’s DHCP settings.
The LAN IP address of WiFi Router. The default value is 192.168.1.1. In IP-
based networks, data packets are sent to the network devices' specific IP
addresses.
The LAN subnet mask of WiFi Router. Its default value is 255.255.255.0

Spectrum RAC2V1K Specifications

General

Brand	Spectrum
Model	RAC2V1K
Category	Network Router
Language	English