Spectrum RAC2V1K User Manual

30
2.3.6.4 WebDAV
The client can write operations in WebDAV directory with appropriate permissions. This page
shows information about the WebDAV Server. To set up WebDAV go to Advanced > Servers
> WebDAV.
1. From the navigation panel, go to Basic > Services > WebDAV.
2. Connect an external USB hard disk drive or USB flash drive to your WiFi Router, and your
device will be displayed here.
3. HTTP Access Port:
4. HTTPS Access Port:
5. Enable Outside Access:
The port to access the WebDAV server for HTTP protocol in the
local area network (default value: 80).
The port to access the WebDAV server for HTTPS protocol in the
local area network (default value: 443).
Select On/Off to enable/disable access to WebDAV server by wide
area network.

Spectrum RAC2V1K Specifications

General

Brand	Spectrum
Model	RAC2V1K
Category	Network Router
Language	English