Spectrum RAC2V1K User Manual

88
2.4.3.2.3 Client ACL
Client ACL can forbid the client from accessing to the WiFi Router. The client in the Client
ACL List can’t visit the resource of WiFi Router and the internet.
Steps to set up Client ACL:
1. From the navigation panel, go to Advanced> Security> IPv4 Firewall> Client ACL.
2. Enable Client ACL: Enable or disable Client ACL function.
3. Client: MAC address of LAN-side devices.
4. Add/Delete: Click or to add/delete the profile.
5. When done, click Apply.

Spectrum RAC2V1K Specifications

General

Brand	Spectrum
Model	RAC2V1K
Category	Network Router
Language	English