Chapter 3: USB Sharing
9. If your driver does not appear, you will need to locate the correct driver and
click Have Disk to install it.
10. If everything is configured correctly, the Wizard will display the message,
"You’ve successfully added ‘your printer name’
on
‘IP address’." Click Next.
11. (Optional). You can choose to set this printer as your system Default Printer by
selecting the checkbox next to "Set as the default printer."
12. Installation can be verified using the Print a test page button. Click Finish to
complete.
User Guide Model RAC2V1S 42
To Next Page
Loading...
Need help?
General
