Spectrum RAC2V1S User Manual

Chapter 3: USB Sharing
Printer Sharing
Printers may be shared within your network by connecting a USB printer device to
the router. All users connected to your network will be able to use the device
attached to the router.
Connecting a Printer
Printer sharing is enabled by default. To connect a printer, attach it to the USB port
located on the back panel of the router.
NOTE:
• Check your printer's specifications to ensure that it
supports IPP/1.1 as not all USB printers support this
protocol.
• Ensure the printer driver supports your operating
system.
• To ensure that your printer driver is working properly on
a PC, you can connect the printer to the PC directly
before attempting to install the printer over the network.
Configuring a Printer
Configuring a Printer for Windows XP
1. Start the Add Printer Wizard:
• Click Start.
• Select Settings  Printers and Faxes  Add Printer. OR
• Select Control Panel  Printers and Faxes  Add Printer.
2. Choose "A network printer, or a printer attached to another computer." Click
Next.
User Guide Model RAC2V1S 33

Spectrum RAC2V1S Specifications

General

Brand	Spectrum
Model	RAC2V1S
Category	Network Router
Language	English