26 SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL
EN
This function overwrites all model memories. Ensure that the
models currently in your transmitter are saved on an Memory card
separate from the transmitter before performing this function.
To import an individual model file from the Memory card:
1. Save the model le to the Memory card.
2. Select the Model List location where you wish to import the
new model le.
3. In the Memory card menu, scroll to Select Option and press
the scroll wheel once.
4. Scroll to Import Model and press the scroll button again to
save the selection. The Select File screen appears.
IMPORTANT: When you select Import, the transmitter leaves
the System Setup List.
5. Select the model le you wish to import. The Overwrite screen appears.
6. Select the model that you would like to import the model to.
7. Select Import to conrm overwriting the current model le.
The transmitter activates the new model le and the Main
Screen appears.
A Preight Checklist may appear prior to the Main Screen if the
checklist was active during the model le export. Select MAIN to
exit the Preight Checklist.
See “Preight Setup” for more information.
Import All Models
To import all models from the Memory card:
1. Select Import All Models.
2. Conrm by selecting IMPORT.
IMPORTANT: After importing a model, you must rebind the
transmitter and receiver. The Main Screen must show DSM2 or
DSMX in the upper left corner.
You can import a model to any location you want. If you prefer to
use Import All, you can use your PC to rename the SPM le. The
rst two digits (01 to 50) are the destination model number. Your
Memory card can only contain 50 models. Save les to folders on
the card then remove from the card all unused models. Files are
selected by their position in the directory table.
This menu enables you to:
• Import (copy) models from another NX8 transmitter
• Export (transfer) models to another NX8 transmitter
• Update Spektrum AirWare™ software in the transmitter
• Install/Update sound les
• Take screen shots
• Import or export color palettes
• Select from internal or external memory locations
SYSTEM SETUP
Transfer Memory card
Import Model
Memory Location
In the Volume selection you can choose from the Internal or
Extermal memory locations.
Select the internal memory location to save to the memory bank
built into the NX8. Select the external memory location to save to
the micro Memory card slot.
To Next Page
Loading...
Need help?
General
