Need help?Do you have a question about the Spektrum DX10t and is the answer not in the manual?
General| Brand | Spektrum |
|---|---|
| Model | DX10t |
| Category | Transmitter |
| Language | English |
Instructions for charging the integrated LiPo battery using the supplied charger.
Safety warnings and precautions for handling and charging batteries to prevent damage or injury.
Using the SD card for model import/export, software updates, and file sharing.
Explanation of the elements and indicators visible on the transmitter's main screen.
Procedure for selecting a model from the transmitter's internal memory.
Selecting the model type (Airplane, Helicopter, Sailplane) for specific functions.
Selecting 'Helicopter' as the model type.
Refer to wing-type instructions for naming the helicopter model.
Choosing the correct Swashplate Type for helicopter setup.
Assigning and editing Flight Modes using switches for helicopter control.
Verifying and editing names for helicopter Flight Modes (e.g., Autorotation).
Configuring helicopter servo parameters: travel, sub-trim, reverse.
Adjusting dual rate and exponential for Aileron, Elevator, and Rudder.
Setting up the throttle cut function for engine shut-off.
Setting throttle and pitch curves for helicopter control.
Selecting 'Sailplane' as the model type.
Refer to wing-type instructions for naming the sailplane model.
Choosing the wing type that best fits the sailplane model.
Programming and assigning sailplane Flight Modes to switches.
Overview of assigned channels and their functions for sailplanes.
Configuring sailplane servo parameters: travel, sub-trim, reverse.
Refer to wing-type programming for dual rate and exponential setup.
Throttle cut function is active only if sailplane has a motor.
Refer to wing-type programming for throttle curve setup.
Configuring sailplane mixes based on wing type; 6 optional mixes.
Adjusting sailplane camber presets for ailerons, flaps, and speed.
Adjusting sailplane camber system values for spoilers and ailerons.
Refer to wing-type programming for range test procedure.
Refer to wing-type programming for timer setup.
Specifications and key features of the AR10000 receiver.
Explains power system needs for reliable receiver operation and to prevent in-flight failures.
Recommendations for testing power systems with multiple servos.
Instructions for installing primary and remote receivers in the model aircraft.
Guidelines for mounting servos correctly, avoiding overtightening.
Warnings and tips for handling, installing, and preventing servo damage.
List of part numbers and descriptions for the Spektrum DX10t.
Minimum antenna separation distance for RF exposure safety compliance.
Outlines safety standards and guidelines for model aircraft operations.
Encouraging compliance with safety standards for model aircraft.
Details warranty coverage for defects in materials and workmanship.
Outlines exclusions from warranty coverage, such as misuse or cosmetic damage.
Explains how to obtain service and requirements for warranty claims.
Contact details for ordering replacement parts.
Declarations of conformity with relevant European Union directives.
Guidelines for the proper disposal of waste electrical and electronic equipment in the EU.
To Next Page
