Spektrum DX10t User Manual

7SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
6. PROGRAMMING A WING TYPE MODEL IN SYSTEM SETTINGS
The DX10t is programmed with a clear software structure
that you will nd easy to handle after a short time. Every
pilot has his own favorites in the combination of switches
and potis, and the DX10t gives you all the options you need
to program your favorites.
3-1 Basic Structure
System Setup - Function List
When pressing the Roller while powering the radio on,
you access System Setup. In this setup screen, you
begin by selecting the Model Type you want to program.
The programmed parameters in the System Settings work
in correlation with and directly influence the Function List.
For example: The transmitter comes with Wing Type
models assigned with 5 Channels:
Motor
Aileron
Rudder
Elevator
Gear
If your model also has Flaps, you will choose them in
the System Settings. If you program single parameters,
you will find the Flaps for adjusting in the submenu Flap
System. You will find many menu points in different Model
Types showing the same content or slightly different
variations due to different Model Types.
For ease of use, we will not list repeat descriptions and
refer to similar handling in previous steps. It is also
not possible to list all of changeable parameters in the
manual.
If you familiarize yourself with the Roller Button and Menu
Structure, you will easily understand and use all of the
options that this fantastic transmitter offers.
MENU STRUCTURE
Once you have familiarized yourself with the basic
structure of the transmitter, you can begin programming
your transmitter, beginning in the System Settings menu.
The following parameters are in the System Setting
menu:
• Model Select
• Model Type
• Model Name
• Wing Type
• Flight Mode Setup
• Flight Mode Name
• Channel Assign
• Trim Setup
• Model Copy
• Model Reset
• Warning
• Telemetry
• Preight Setup
• Frame Rate
• Bind
• Trainer
• Clear/Back Auto-Trim Set
• Analog Switch Setup
• System Settings
• Transfer SD Card
6-1 Model Select
There are 50 Models from memory available in the
internal Memory. Select one with the Roller and then
press the Roller to confirm.
6-2 Model Type
Model Type programs the selected model memory
to a function in Airplane, Helicopter or Sailplane
programming. With this you select specific functions. For
example, when you select Helicopter as the model type,
the swashplate function is automatically chosen in the
function list.

Spektrum DX10t Specifications

General

Brand	Spektrum
Model	DX10t
Category	Transmitter
Language	English