EasyManuals Logo

Spektrum DX10t User Manual

Spektrum DX10t
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
5. PREOPERATION
4. THE ROLLER
Read all safety precautions and literature prior to use of this product
Never allow minors to charge battery packs
Never drop charger or batteries
Never attempt to charge damaged batteries
Never attempt to charge a battery pack containing different types
of batteries
Never charge a battery if the cable has been pinched or shorted
Never allow batteries or battery packs to come into contact with
moisture at any time
Never charge batteries in extremely hot or cold places (recom-
mended between 50–80 degrees F or 10–27 degrees C) or place
in direct sunlight
Always inspect a new battery before charging
Always terminate all processes and contact Horizon Hobby if the
product malfunctions
Always keep batteries and charger away from any material that
could be affected by heat (such as ceramic and tile), as they can
get hot
Always end the charging process if the charger or battery be-
comes hot to the touch or starts to change form (swell) during the
charge process
Battery and Charging Precautions and Warnings
Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction,
electrical issues, excessive heat, FIRE, and ultimately injury and property damage.
Charging Your Transmitter
Before you rst power on your new transmitter, you should
charge the integrated LiPo Battery with the supplied charger.
Since the charger offers different country/regional variations,
select the front plug that is used in your country/region.
Press the push button on the charger and turn it to the left. You
can then put them aside.
To mount the plug of your country/region, install the plug and
turn it to the right till it locks. You will nd the loading jack of the
radio under the left cover that is left from the ON/OFF Switch.
Charging will be indicated with a blue LED on front. After switch-
ing on the radio, you will see the battery voltage graphics and
current volt.
Initial charge time of your transmitter battery is 25 hours. The
blue LED on the front of the transmitter will ash when charging
is complete.
The Roller is an important tool. Use it for scrolling down in
Menus, selecting within submenus and conrming settings. After
a short time, you will work quickly through menus and highlight
functions you wish to program or select.

Other manuals for Spektrum DX10t

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spektrum DX10t and is the answer not in the manual?

Spektrum DX10t Specifications

General IconGeneral
BrandSpektrum
ModelDX10t
CategoryTransmitter
LanguageEnglish

Related product manuals