11
2.9 Equipment delivery, handling and storage
Factory shipment
The product is tested, calibrated and inspected prior to shipment to ensure proper operation.
Receipt of shipment
Each carton should be inspected at the time of delivery for possible external damage. Any visible
damage should be recorded immediately on the carrier’s copy of the delivery slip.
Each carton should be unpacked carefully and its contents checked for damage. If it is found that
some items have been damaged or are missing, notify Spirax Sarco immediately and provide
full details. In addition, damage must be reported to the carrier with a request for their on-site
inspection of the damaged item and its shipping carton.
Storage
If the product is to be stored for a period prior to installation, the environmental storage conditions
should be at a temperature between 0°C and 65°C (32°F and 149°F), and between 10% and
90% relative humidity (non-condensing).
Ensure there is no condensation within the unit before installing and connecting the power.
Operators instructions
An alternative operator instruction manual, in place of this manual, for operating the equipment
is required. This will avoid the commissioning menu passcode being disclosed to the operator.
The alarm reset passcode may optionally be disclosed if this is deemed necessary.
To Next Page
Loading...