Getting Started
Procedure 2: Verify Contents of Shipment
16 | Getting Started with Spirent TestCenter
Procedure 2: Verify Contents of Shipment
Review the contents of the package to ensure that you have all the components necessary
for a successful installation.
Checking a Chassis Package
The following standard items are shipped with each Spirent chassis.
• One Spirent SPT-N4U, SPT-N11U, or SPT-N12U chassis with one or more test
modules, and with blank panels and firmware installed.
Note: For packaging, installation, and setup information about the Spirent C1 or the
PX3/DX3-QSFP-DD-8 appliances, refer to the installation documentation that is
included in your shipment.
• One Cable Kit, which includes:
• One (1) or two (2) power cords with the SPT-N4U, and up to seven (7) with the
SPT-N11U/SPT-N12U chassis, either domestic or international.
(see “Power supply connector” on page 30).
• One white 10 ft. (3.048 m.), crossover Ethernet LAN cable (RJ-45); used to
connect the Spirent chassis directly to a PC.
• One blue 10 ft. (3.048 m.), straight-through Ethernet LAN cable (RJ-45); used to
connect the Spirent chassis to a hub or LAN.
• One purple 3 ft. (.9144 m.), straight-through Ethernet LAN cable (RJ-45); used to
connect one Spirent chassis to another Spirent chassis.
• One Ferrite block; connects onto the Ethernet cable that attaches the Spirent
chassis to your network or a hub. The ferrite block reduces potential EMI
interference.
• DVD containing Spirent TestCenter application software (with online Help files),
documentation files in PDF format, and Spirent TestCenter License Entitlement ID
Certificate (shipped with Spirent TestCenter orders).
Checking a Spirent C50 Appliance Package
The following items are shipped with each Spirent SPT-C50. Check the package to ensure
you have received the items listed here:
• One Spirent SPT-C50 base unit with one or more NICs and firmware installed.
• One black power cord, either domestic or international
• One blue 10 ft. (3.048 m.), straight-through Ethernet LAN cable (RJ-45); used to
connect the SPT-C50 to a hub or LAN
• One purple 3 ft. (.9144 m.), straight-through Ethernet LAN cable (RJ-45); used to
connect one Spirent chassis/appliance to another Spirent chassis/appliance.
• DVD containing Spirent TestCenter application software (with online Help files),
documentation files in PDF format, and Spirent TestCenter License Entitlement ID
Certificate (shipped with Spirent TestCenter orders).
To Next Page
Loading...