Getting Started
Procedure 11: Obtain Your License Key
50 | Getting Started with Spirent TestCenter
Procedure 11: Obtain Your License Key
There are two types of license keys.
• Chassis license keys reside on the chassis (page 50)
• Test m od ule license keys reside on test module (page 53)
Refer to the applicable section in this procedure for the type of license you need.
Chassis License Key
Use your License Entitlement ID (EID) to obtain your license key file from the Spirent
Communications Customer Service Center website and then use the Spirent TestCenter
License Management window to install it on your chassis controller.
• The License Entitlement ID is on the License Entitlement ID Certificate that is
shipped with the Spirent TestCenter software.
• The License Entitlement ID will also be emailed to you, if your email address was
included on your purchase order.
If you included a request for Spirent to install the license key on the chassis when you
placed your order, you may skip this section and go to Procedure 12 on page 54.
Note: Each activation screen in the process provides detailed step-by-step instructions.
The instructions in this section are an overview of the license activation process that you
will follow from the Customer Service Center home page.
To obtain your license key file:
1 Locate the License Entitlement ID (EID) that applies to your order.
2 Go to
https://support.spirent.com
3 Click the License Activation item in the top menu.
The License Activation page opens (Figure 1-17 on page 51).
Review the instructions on this screen carefully before you continue.
To Next Page
Loading...