Spirit CU800+ - Assembly Instructions; Unpacking and Tools

4
ASSEMBLY INSTRUCTIONS
UNPACKING
1. Cut the straps then lift the box over the unit and unpack.
2. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing for reference.
ASSEMBLY TOOLS
#93. Phillips Head
Screw driver (1 pc)
#100. 12/14mm
Wrench (1 pc)
#92. 13/15mm
Wrench (1 pc)