25
IR Remote control
IR Remote control
The volume potentiometer can be remotely controlled using any infrared (IR) remote control.
The special feature is that the Phonitorxe learns your remote and not the other way around. You do not need a uni-
versal remote control. Take, for example, the remote control of the CD player. Out of the many buttons there are two
you hardly use if at all. Assign Volume up / Volume down to these two buttons and let the Phonitorxe learn them.
• Press the IR PGM VOLUME button () on the rear of the unit until you note the actuation
point. The Power LED now lights up brighter.
• Point your remote control towards the VU meters () and push the button you wish to
use to lower the volume. The power LED flashes once per push. Press the same button
repeatedly until the power LED flashes three times within a short interval –
programming this button is then completed.
To Next Page
Loading...
