SPL Phonitor xe - Balanced Headphone Output

29
Specications
Outputs
Balanced headphone output
• Neutrik -pin XLR connector (front and rear side)
• Pin wiring:  = L (+),  = L (-),  = R (+),  = R (-)
• Impedance: . ohms
• Damping factor:  @  ohms
• Frequency range:  Hz to  kHz ( - dB)
• Crosstalk at  kHz: - dB
• THD & N: . % (at  dBu,  kHz,  kohms load)
• Noise (A-weighted): - dBu
• Dynamic range: . dB