IP Paging Microphone User Manual
16
When the third parties talking is enable, no matter in the state of initiating or receiving intercom, call or call from a third party
can be initiated or received to realize third party talking.
Initiate intercom: In the intercom process, press the three parties to enter the terminal ID number, and then press the OK
key to initiate the third parties talking.
Receiving intercom: Press【Intercom】key to receive.
Note: During the process, the three parties can clearly hear the voice of the other two parties.
Broadcast
Terminal broadcast
Press number key to input the broadcast terminal ID number, then press【broadcast】button to realize the broadcasting with
the target terminal.
Note: after pressing the number key, use [*] interval to come out, and then press [broadcast] key to realize multiple terminal
broadcasts.
For example: to select terminal 1, terminal 2, terminal 3, terminal 5, terminal 10, please press "1*2*3*5*10", and then press
[broadcast].
Partition broadcast
Press 【*】,then press【Number】key to enter the broadcasting zones, and last press【Broadcast】to realize zone broadcast.
Note: If you want to select multiple broadcasting zones, please with【*】space between zones.
For example: to select terminal 1, terminal 2, terminal 3, terminal 5, terminal 10, please press "1*2*3*5*10", and then press
[broadcast]..
remote broadcast
In the processing of broadcasting, press【File】to select audio file.
Monitoring
（1）Press【figure】to input the ID number of monitored terminal, then press【monitor】key to realize monitoring with the
target.
（2）Press【cancel】to exit the monitor status.
To Next Page
Loading...