43
2. SECIAL SAFETY INSTRUCTION
• Plug the treadmill directly into a dedicated grounded circuit, which provides a path of
least resistance for electric current to reduce the risk of electric shock.
•
Place the treadmill in a suitable place so that the wall plug is visible and accessible.
•
Make sure the plug complies with the socket.
•
Power input: 220v-240v AC
•
DO NOT let the power cable connect the roller; DO NOT lay the cable on the running
belt; If you observe any damage or wear on the mains plug or on any section of the
mains lead then please have these replaced immediately by a qualified electrician –
do not attempt to change or repair these yourself.
• Please unplug the machine for cleaning or maintenance.
Power source
WARNING: It could cause damage to human body or ma-
chine if the machine is not unplugged.
• Make sure the power supply is connected and the safety lock is effective before
using the treadmill. Fit one side of the safety pin on the treadmill and clip the other
side on your clothes or belt, which will enable you to pull off the safety pin promptly
in an emergency.
• DO NOT use the machine in area with high humidity or temperature or outdoors.
•
•
When the treadmill is not being used, the power cord should be unplugged and the
safety pull pin removed.
Always attach the safety pull pin rope to your clothing when using the treadmill. If the
treadmill should suddenly increase in speed due to an electronics failure or the speed
being inadvertently increased, the treadmill will come to a sudden stop when the pull
pin is disengaged from the console.
!
• In case of any abnormality during the use process, please remove the safety lock
immediately, grasping the handlebar and jumping onto the two edgings, then get off
the treadmill after it stops.
To Next Page
Loading...
