57
7. OPERATING INSTRUCTION OF TREADMILL
1. Insert power plug into socket and turn on power switch (light turns red). You will hear
a „beep“ and window on instrument panel turns on.
Power socket with ground line must be used for your safety when you
use the treadmill.
Power switch
2. Place safety lock at yellow position of instrument panel, when the treadmill can be
normally used. Please clamp the safety look onto your clothes when using the ma-
chine to avoid accidents. You can open the safety lock at any time to immediately
stop the motor to avoid falling over. Please place the safety lock back and start the
program to use the machine again.
To Next Page
Loading...
