Sprinte ASP 116 evolution - Setting of the Atvlift Inverter

ASP 116 EVOLUTION – INSTALLATION MANUAL
Sprinte SAS. All rights reserved , including translations.
38
13 SETTING OF THE ATVLIFT INVERTER
All ATVLift Inverter settings are done from the ASP116 Evolution terminal.
+
+ …
Remove the VVVF parameter’s protection
…
Basic settings (comfort, stop precision)
Set the maximum speed of your motor
Set the nominal load of your car
Choose « 2,00ms-2 ». Do not change
CONFIGURATION
FREQ. INVERTER
MENU VF PROTECT.
PROTECTED
MENU VF PROTECT.
NOT PROTECTED
EMERGENCY OPERA
Choose
CONFIGURATION
FREQ. INVERTER
LIFT DATA
RATED CAR SPEED
1,00 m/s
LIFT CAPACITY
400 kg
ACCEL. COMFORT
2,00 m.s-2
ENTER
ENTER
ENTER
ENTER
 -
 -
 -
 -
 +
 -
 -
 -