Operators manual MODEL 80XX Planter
page 63 of 173
Maintenance
•Clean the machine, especially connections and threaded unions of any traces of oil, fuel or
preservatives before carrying out maintenance/repairs. Never use aggressive detergents. Use lint-free
cleaning cloths.
•Before cleaning the machine with water or steam jets (high-pressure cleaners) or other cleaning
agents, cover or tape all openings which – for safety and operational reasons - must be protected
against ingress of water, steam or leaning agents. Special care must be taken with electric motors and
switching cabinets, as well as all additional electrical or electronic components. After cleaning, remove
all covers and tape completely.
•After cleaning, examine all fuel, lubricant and hydraulic oil lines for leaks, loose connections, scuffing
marks and damage,. Any defects found must be rectified without delay.
•Immediately retighten any screwed connections that have been unscrewed during maintenance and
repairs.
•Any safety devices removed for setting-up, maintenance or repair purposes must be refitted and
checked immediately upon completion of the maintenance and repair work.
•Ensure that all fuels, consumables and replaced parts are disposed of safely and with minimum
environmental impact.
To Next Page
Loading...
