(#KIT-12V, sold separately)
3.7 V rechargeable battery pack
(#LIT-10, sold separately)
NOTE
We recommend using the SPYPOINT #LIT-10
rechargeable lithium battery pack, sold separately.
FOR BEST RESULTS AND NO LEAKAGE
Use only new lithium or alkaline batteries.
Do not mix old and new batteries.
Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
Unlock and open the CELL-LINK door.
Eject the battery holder by pushing the latch (1) forward and pressing down on the battery holder (2). The
battery holder will be unlocked and you will be able to remove it.
Insert 8 AA batteries following the (+) and (-) polarity indicators.
Place the battery holder back into the battery compartment, an audible click should be heard.
FORMATTING YOUR MICROSD CARD
Before inserting the microSD card into your CELL-LINK, you must reformat it using a computer to ensure proper
functionality. Go to our website: www.spypoint.com, if you need help formating your microSD card.
The memory card is sold separately. Therefore, you must first purchase a class 10 microSD card, between 2 and 32
GB of memory.
INSERTING A MICROSD CARD
Open the CELL-LINK battery compartment door.
Make sure the camera is turned OFF.
To Next Page
Loading...
