Spypoint CELL-LINK - PREPARATION; ATTACH THE ANTENNA; SELECT A POWER SOURCE

4. SIGNAL lights (5)
5. SIM card slot
6. Latch to hold/release the battery compartment
7. Battery compartment
8. AA battery holder
9. STATUS light
10. ON/OFF switch
11. MicroSD card slot
12. Screw-thread for standard ¼”-20 tripod mount
13. Antenna
14. Port for cable with SD adapter
15. 12 V jack
16. Locking latch
PREPARATION
ATTACH THE ANTENNA
When buying the CELL-LINK, the antenna comes in the box and is detached from the device. To attach it, follow the
next steps:
1. Remove the cap which covers the antenna connector of the CELL-LINK.
2. Screw the antenna in the connector by turning it clockwise.
SELECT A POWER SOURCE
8 lithium or alkaline AA batteries
12 V rechargeable battery