Spypoint CELL-LINK - MicroSD Card Installation and Usage; Installing a MicroSD Card; Note on Continuous Recording; Inserting Your MicroSD Card

(CONTINUATION) CELL-LINK IN FUNCTION
3 4 5
or
2 possibilities after the cellular
signal search:
Only the red LED is flashing =
network issue.
The STATUS light is flashing and X
LED are fixed = indicates the
strength of the signal.
Good to excellent
signal
Weak signal
Insufficient signal
The process lasts 30 s, after which
the CELL-LINK is operational.
All lights turn off.
While the CELL-LINK is in
function, the STATUS light is
turned on and fixed.
INSTALLING AND CONNECTING THE CELL-LINK
To connect the SPYPOINT CELL-LINK to your trail camera from any brand, follow these steps.