Spypoint Force-Dark - Configuration and General Settings; Timelapse Settings; Video Settings; General Settings

video settings
-
Allows to set the options for VIDEO mode.
general settings
-
Allows to set the camera's general options.
timelapse settings
- Allows to set the options for TIME LAPSE mode.
delay
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before the camera records the next video. A longer delay
minimizes the number of videos taken and maximizes the battery life. A shorter delay maximizes the number of videos taken
but requires more battery power. Shorter time intervals are recommended when the camera is used for security purposes.
video length
(10s/30s/60s/90s)
Allows to congure the recording length of video sequences when the camera is set in Video mode.
photo first
(Yes/No)
When this option is enabled, a photo is taken immediately before each video.
Note: The number in the le name of the photo will precede the number in the le name of the corresponding video.
For example, if the name of the photo is PICT001.JPG, the name of the corresponding video will be VID002.AVI
delay
(From 1 min to 24 h)
Allows the camera to take photos at regular preset intervals. For example, if "5 m" is selected in the TIME LAPSE mode, the
camera takes a photo every 5 minutes even if there is no detection. This option allows the user, among other things, to obtain
photos of game outside the detection range of the camera.
Note: The Time lapse mode only applies for photos, not videos. When the Time lapse mode is selected, the Delay option and the
Multishot mode are disabled.
configuration menu and general settings / 9
device name
Allows the camera to be named via the electronic keyboard. This option is particularly useful for users with more
than one camera.
Language
(English / Français / Deutsh)
Sets the displayed language on your camera.
date format
(MM/DD/YYYY or DD/MM/YYYY)
Congures the date format (month, day, year, or day, month, year)
time format
(12 H or 24 H)
Allows to select between a12 hour or 24 hour time format.
Date
Sets the date.
time
Sets the time.