Spypoint Force-Dark - Configuration Menu; Photo Settings; Recommended Settings

configuration menu / 8
photo settings
-
Sets the options for PHOTO mode.
configuration menu
Allows the user to congure the PHOTO, VIDEO, TIMELAPSE and GENERAL SETTINGS.
Delay
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the delay between each detection before the camera records the next video. A longer delay
minimizes the number of videos taken and maximizes battery life. A shorter delay maximizes the number of videos taken
but requires more battery power. Shorter delays are recommended when the camera is used for security purposes.
MULTIshot
(1/2/3/4/5/6 photos consécutives)
Allows you to take up to 6 consecutive photos for each detection with a 5-second delay between each photo.
recommended settings
The camera can be congured for usage in trails. This conguration will typically result in lower activity levels, fast moving subjects and fewer
photos. These settings increase the chances of capturing animals following one another.
The camera can also be congured for usage at a feeding site. This conguration will typically result in higher activity levels, slow moving
subjects and more photos. This conguration makes it possible to reduce the number of photos taken while capturing all the activities on the
feeding site.
The below table shows the suggested settings for both congurations:
trail feeder
Delay Instant 5 min
multishot 1 1-6
Battery life can be compromised if the settings of your camera are not adapted to the actual situation.