Spypoint LINK-EVO? LINK-EVO-V - Page 12

12
BASIC SETTINGS
PHOTO MODE
Delay:
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection
before the camera records the next photo. A longer delay minimizes the
number of photos taken and maximizes the battery life. A shorter delay
maximizes the number of photos taken but requires more battery power.
A shorter delay interval is recommended when the camera is used for
security purposes.
Multi-shot:
(1/2 consecutive shots)
Takes up to 2 consecutive shots at each detection, with a 5-second
delay between each photo. This option allows the user to get up to 2
photos when the camera is in PHOTO mode.
Camera name
Allows to identify the camera clearly. This option is particularly useful for
users with more than one camera.
TIME LAPSE MODE
Interval:
(3m/5m/15m/30m/1h)
Allows the camera to take photos at regular preset intervals. For example,
if the option "5m" is selected in the TIME LAPSE mode, the camera takes
a photo every 5 minutes even if there is no detection. This option allows
the user to obtain photos of game outside the detection range of the
camera.
Note: The TIME LAPSE mode only applies for photos, not videos. When
the TIME LAPSE mode is selected, the DELAY option and the MULTI-
SHOT mode are disabled.
VIDEO MODE
Delay:
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next video.
Photo rst
When this option is enabled, a photo is taken immediately before each
video.
Note: The le name of the photo corresponds to the digit before the
video le name. For example, if the name of the photo is PICT001.JPG,
the name of the video will be VID001.AVI.
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
SPYPOINT LINK app